Saturday 28 March 2015

Boo Bear Pattern

Update June 14, 2016: This pattern has been removed and is no longer available. Read Copycats? post for explanation. 

Update September 21, 2018: After receiving many supportive comments on my Copycats? post regarding design inspiration versus copying, I am ready to share this pattern again. Happy crocheting!!

* * * * * 
I continue to crochet critters using my Blue Bunny pattern as a prototype. This time I've altered the pattern to make a bear. I made him a bit chubbier with slightly longer arms. He has a little round tail and his ears are totally different of course. 

Meet Boo Bear. He was happy to pose for photos last night before the sunlight faded. Isn't he a cute little bear? 
Boo Bear is a shy little bear. I think it would be good for him to have some playmates so I plan to make more in a rainbow of colours. As always, I'll be sure to share photos as my bear clan grows. 

I've included the free pattern for Boo Bear below in case you would like to make one too. 


Boo bear PATTERN

PDF Version


Materials used:

1 ball (5 oz) of worsted weight yarn in dark grey.
1 ball (5 oz) of worsted weight yarn in cream colour.
Hook size = 3.5 mm
yarn needles to join pieces
Polyester Fiberfill for stuffing
Small amount of black yarn (for eyes)
Small amount of pink yarn (for mouth)

Stitches used:

ch - chain stitch
ss - slip stitch
sc - single crochet
inc - sc increase
dec - sc decrease (sc2tog - single crochet 2 together)
Magic Circle - see how here (start each piece with magic circle)

Time to Complete - 16 hours (approximately)
Finished size - 14 inches tall

Legs (x2)
Use dark grey yarn. Working from the bottom up, starting with a magic circle, use stitch marker to mark end of rows (work in continuous rounds with no joining)
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - (2 sc inc) x6 (24)
R5-R6 - sc around (24)
R7 - sc2tog x4 + 16 sc (20)
R8 - sc2tog x4 + 12 sc (16)
R9-R16 - sc around (16)
R17 - (3 sc inc) x4 (20)
R18-R20 - sc around (20)
R21 - (4 sc inc) x4 (24)
R22 - sc around (24) Finish off and stuff leg.

Body
Join legs on middle 2 stitches as shown in this tutorial. The instructions are in German but the video alone is enough to understand the technique. Once the legs are joined continue crocheting around both legs to form the body.
R23 - sc around (49)
R24 - sc around (49)
R25 - (5 sc inc) x 7 + 7 sc (56)
R26 - sc around (56)
R27 - (9 sc inc) x 5 + 6 sc (61)
R28 - sc 24 + (sc inc + 2 sc) x6 + 23 sc (67)
R29 - sc around (67)
R30 - sc around (67)
R31 - sc around (67)
R32 - sc around (67)
R33 - (8 sc dec) x6 + 5 sc dec (60)
R34 - sc around (60)
R35 - sc around (60)
R36 - sc around (60)
R37 - (8 sc dec) x6 (54)
R38 - 14 sc dec dec + 23 sc dec dec + 10 sc (50)
R39 - sc around (50)
R40 - 14 sc dec + 23 sc dec + 9 sc (48)
R41 - sc around (48)
R42 - 15 sc dec + 21 sc dec + 8 sc (46)
R43 - sc around (46)
R44 - 14 sc dec + 20 sc dec + 8 sc (44)
R45 - sc around (44)
R46 - 13 sc dec + 19 sc dec + 8 sc (42)
R47 - sc around (42)
R48 - 12 sc dec + 18 sc dec + 8 sc (40)
R49 - sc around (40)
R50 - 13 sc dec + 17 sc dec + 6 sc (38)
R51 - sc around (38)
R52 - 12 sc dec + 17 sc dec + 5 sc (36)
R53 - sc around (36)
R54 - sc around (36)
R55 - (4 sc dec) x6 (30)
R56 - sc around (30)
R57 - sc around (30)
R58 - sc around (30)
R59 - (3 sc dec) x6 (24)
R60 - sc around (24)
R61 - (2 sc dec) x6 (18)
R62 - sc around (18)
Finish off and cut yarn leaving a long tail to attach the head. Stuff body firmly.

Arms (x2)
Start with cream yarn
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - sc around (18)
R5 - (4 sc dec) x3 (15)
R6 - sc around (15)
R7 - (3 sc dec) x 3 (12)
Change to dark grey yarn at end of R7
R8 - sc around (12)
R9 - (4 sc dec) x 2 (10)
R10-R37 - sc around (10)
Finish off and cut yarn leaving a long tail for joining. Stuff only hands and part way up arm.

Head
Use cream yarn.
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - (2 sc inc) x6 (24)
R5 - (3 sc inc) x6 (30)
R6 - (4 sc inc) x6 (36)
R7 - (5 sc inc) x6 (42)
R8 - (6 sc inc) x6 (48)
R9 - (7 sc inc) x6 (54)
R10 - (8 sc inc) x6 (60)
R11 - sc around (60)
R12 - sc around (60)
R13 - sc around (60)
R14 - sc around (60)
R15 - sc around (60)
R16 - sc around (60)
R17 - sc around (60)
R18 - sc around (60)
R19 - sc around (60)
R20 - sc around (60)
R21 - (8 sc dec) x6 (54)
R22 - sc around (54)
R23 - (7 sc dec) x6 (48)
R24 - (6 sc dec) x6 (42)
R25 - (5 sc dec) x6 (36)
R26 - (4 sc dec) x6 (30)
R27 - (3 sc dec) x6 (24)
R28 - (2 sc dec) x6 (18)
R29 - (2 sc dec) x3 + 6 sc (15)
R30 - sc around (15)
R31 - sc around (15)
Finish off and cut yarn leaving a long tail for joining. Stuff head and neck firmly to hold shape.

Hood
Use dark grey yarn and follow pattern for Head up to Row 24. Check to make sure hood fits head as and adjust tension based on fit. You may have to move up a hook size if the hood is too tight.
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - (2 sc inc) x6 (24)
R5 - (3 sc inc) x6 (30)
R6 - (4 sc inc) x6 (36)
R7 - (5 sc inc) x6 (42)
R8 - (6 sc inc) x6 (48)
R9 - (7 sc inc) x6 (54)
R10 - (8 sc inc) x6 (60)
R11 - sc around (60)
R12 - sc around (60)
R13 - sc around (60)
R14 - sc around (60)
R15 - sc around (60)
R16 - sc around (60)
R17 - sc around (60)
R18 - sc around (60)
R19 - sc around (60)
R20 - sc around (60)
R21 - (8 sc dec) x6 (54)
R22 - sc around (54)
R23 - (7 sc dec) x6 (48)
R24 - (6 sc dec) x6 (42)
R25 - ss loosely around (42)
Finish off and cut yarn leaving a long tail for joining. Position on head as shown in photos above. After attaching head to body, I like to wrap the tail from the hood around the neck to cover joining stitches.

Ears (x2)
Use dark grey yarn.
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - (2 sc inc) x6 (24)
R5-8 - sc around (24)
Finish off leaving 8" tail for joining.
Fold ear in half to form a natural curve and attach to head (see photo above).

Tail
Use dark grey yarn.
R1 - 6 sc (6)
R2 - inc x6 (12)
R3-4 - sc around (12)
Finish off leaving 6" tail for joining.
I just stuffed starting yarn end into tail but so it is only lightly stuffed then attached to form a neat little ball on his backside (see photo above).
Refer to photos of Boo Bear before joining ears, head, arms and tail. I like to pin the pieces in place to pick the most pleasing look before attaching. 

Be the first to comment - click on No comments: below






46 comments:

  1. hi just to let you know i think the pattern for boo bear needs looking at ( i could be wrong)
    row 25 of legs/body i think the +4sc should be +7 otherwise you get 53 stitches not 56
    great pattern though

    ReplyDelete
    Replies
    1. The count changes slightly every time I make this. As long as you approximate the increases and decreases evenly on both sides and get the basic shape with an opening to fit the neck, it'll look great. Thanks so much for the feedback. I'm happy to know somebody is giving it a go. Send me a photo when you're done. I'd love to see it.

      Delete
    2. How do i send you a photo?

      Delete
    3. Send me your photo via email to orphanme@yahoo.com - I can't wait to see it.

      Delete
    4. Hola gracias por el patrón ,intentaré hacerlo y te muestro.un gran abrazo .

      Delete
    5. Disculoa tu tienes El patron, porque apenas lo vi pero ya lo quitaron dejaron solo la foto !!

      Delete
  2. ps im not sure if there are any other sight miss calculations as i have only just started this pattern.
    just thought i would let you know

    ReplyDelete
    Replies
    1. I"m making another in chunky yarn and the counts are a little different than the first one I made. I think it depends where the legs join and the starting body count. Like I mentioned above, as long as you're getting the right shape, it'll look great.

      Delete
    2. I wanted to let you know I checked the math on those few rows in the body and made corrections. You were right, it didn't add up. Thanks again for the feedback. I'm still very new to pattern writing. It's nice to know somebody is trying it.

      Delete
  3. ok then cheers and i will do, this is the first time for me trying to adapt as i go along as im not as clever as you lol.
    ive written out most the the lalylala insipation dolls that you have done and cant wait to do them.
    boo bunny came out good and slightly taller but i think thats because i used dk wool lol

    ReplyDelete
  4. i was just wondering do you have any other tips for these sweet dolls apart from the inc and dec part for example

    ReplyDelete
    Replies
    1. I use invisible decreases and crochet very tightly. I am currently using a 3.25 mm hook with chunky yarn for this bear. For the arms I don't usually count rows, just keep going until they look long enough then make the 2nd the same length. I keep the body increases and decreases near the hips in roughly the same spot without really counting. I make sure the hood is tight on the head and squish everything to make a pleasing shape. Sew the head on before adding the ears and face. I hope that helps. Enjoy.

      Delete
    2. And I use pins to figure out where to place the eyes.

      Delete
    3. thanks for the tips and i will send pics once ive completed them lol.
      thanks for the free patterns ill keep checking back to see if you have any new ones. ive written down the bunny, the bear, the kitty and the lamb. just got to write out the piglet and frog ( which ill be doing next :) )

      Delete
    4. If you copy the text for the pattern and paste it into MS Word or some other application, you can print it out. I use the printed copy to check off my rows.

      Delete
  5. the other rows that i adapted were rows 27, 28, and 38

    ReplyDelete
    Replies
    1. Made changes to make the math work for these rows. Thanks.

      Delete
  6. thats ok glad i could help lol i would print them out but got no ink im currently writting out the piglet pattern and have made some changes as the math dont work out lol just to let u know

    ReplyDelete
  7. Thank you for sharing the pattern. I am making one right now. :) I can't wait to see the finish product. Though I make a few alterations here and there.

    ReplyDelete
  8. Hello, first of all THANK YOU !!!
    I'd like to know,if possible,are these pictures showing with the correct pattern?
    I am asking because I don't know how to make the corrections...
    Again, thank you very much !!!
    Zizi

    ReplyDelete
    Replies
    1. Yes, I made the corrections when the errors were pointed out.

      Delete
  9. thanks for the free pattern. i will try to make it. you are very talented.

    ReplyDelete
  10. \I am finished boo bear..I was able to alter the mistakes in the pattern..this is a first for me...thank you so much for the pattern.. it looks pretty awesome.. how do I send you a picture of it?

    ReplyDelete
    Replies
    1. Send it to orphanme@yahoo.com - I'd love to see your Boo Bear. Thanks for sharing.

      Delete
    2. Hello Beth,My Name Is Amit And I'm Running An Israeli Crochet Group On Facebook (https://www.facebook.com/groups/345633168873099/ ) Which Has About 1,500 Members.
      I Would Like Your Permission To Translate This Pattern Into Hebrew Instructions And Post It Into My Group.
      Of course I Will Give You Full Credits & Will Share Links To Your Blog.
      Awaiting Your Reply (Here or via e-mail amit8787@hotmail.com ),Thanks,
      Amit.

      Delete
    3. Hello Amit - Of course you can translate this pattern. I learned how to make toys following free patterns and tutorials and welcome any opportunity to give back. I love sharing my patterns. Thank you for asking. Beth

      Delete
    4. thank you so much !! <3

      Delete
  11. I seem to be having a problem with the body- in the dec rows - rows 28, 33, 37 and 38 so far

    Mary

    ReplyDelete
    Replies
    1. I am sorry, I can no longer offer this pattern. Please read update at top of post.

      Delete
  12. ICH finde die so süß...

    den möchte ich auch noch machen

    ich wünsche noch einen schönen ABEND
    bis bald die BIRGIT aus TIROL

    ReplyDelete
  13. I love the lalylala dolls and was looking for a free pattern eventually if I can't find it free I will purchase the pattern but after reading this I'm not as enthusiastic about making her. So sad .

    ReplyDelete
    Replies
    1. Yes, too bad she was so protective of her creations. Still I admire her work. My email is orphanme@yahoo.com Send me a message if you would like some help with this pattern.

      Delete
  14. Why can't I see your pattern?

    vanessa_godinho@hotmail.com

    ReplyDelete
  15. As stated at the top of the post, it has been removed. Read 'copycats' post for full explanation.

    ReplyDelete
  16. Quel dommage de ne plus pouvoir voir le tuto , j'aurais moi aussi bien tenté ce doudou :( :(

    ReplyDelete
  17. I wonder if they contacted this person and complained to them too? http://www.zabbez.com/. I think that if you have five or more differences in a pattern or thing,(check your local patent office) it is your pattern not theirs and can copyright it for yourself.

    ReplyDelete
    Replies
    1. I love the zabbez flower dolls too. He is very talented with his creations. Thanks.

      I am not worried about legal rights since this is a hobby for fun; not profit. I did share another pattern recently (altered for chunky yarn) called Buster Bear if you would like to try that one.

      Delete
  18. This comment has been removed by the author.

    ReplyDelete
  19. oooooooo thank you, I will have a mooch later. xx

    ReplyDelete
  20. Good write-up, I am normal visitor of one's blog, maintain up the excellent operate,
    and It is going to be a regular visitor for a lengthy time.

    ReplyDelete
  21. SCorbin865@gmail.com is there anyway i can please get a copy of this pattern. My granddaughter fell in love with this doll. This is terrible it reads no longer available. She is very dissappointed.

    ReplyDelete
    Replies
    1. You could try Buster Bear available on my Free Patterns page or purchase a similar pattern from the Lalylala website.

      Delete
  22. Hi,
    I love it, but I have a problem with row 28 (body).
    (Sc inc + 2 sc) x6. It is a total 30 stiches but I have juste 20 stiches with 6 inc between row 27 (61) and row 28 (67). Could you help me?

    ReplyDelete
  23. Thank you 💕 ever so much for this wonderful pattern. I am a grandmother to be of my youngest & only son, his beautiful wife is expecting and all she requested was for a gift as this... I became very disheartened when I realized that I could absolutely not afford to buy this product or pattern! Covid has reduced many, including me, to survival mode. After a search of 3 months on patterns, crochet sites I had finally stumbled on your bear pattern.Thank you, thank you from the bottom of my heart. I will send a picture of the finished product.xx

    ReplyDelete
  24. Hello! I am not certain why a lot of people had problems with your pattern. I made it boo bear in one day with no issues at all. Love the bear and will make a great gift for my grandson!

    ReplyDelete