Tuesday 2 February 2016

Reddy Fox Pattern

Update June 14, 2016: This pattern has been removed and is no longer available. Read Copycats? post for explanation. 

Update September 21, 2018: After receiving many supportive comments on my Copycats? post regarding design inspiration versus copying, I am 'reddy' to share this pattern again. Happy crocheting!!


* * * * *

REDDY FOX PATTERN

Materials used:

1 ball (3.5 oz) of Vanna's Choice yarn in terracotta (red)
1 partial ball (3.5 oz) of Vanna's Choice yarn in crisp white
1 partial ball (3.5 oz) of Vanna's Choice yarn in black
Hook size = 3.25 mm
stitch marker
yarn needles to join pieces
Polyester Fiberfill for stuffing
Small amount of white DK weight yarn (for ear 'fluff')

Stitches used:

ch - chain stitch
ss - slip stitch
sc - single crochet
inc - sc increase
dec - sc decrease (sc2tog - single crochet 2 together)
Magic Circle - see how here (start each piece with magic circle)

Time to Complete - 16 hours (approximately)
Finished size - 14 inches tall

Legs (x2)
Start with black yarn. Work from the bottom up, starting with a magic circle, use stitch marker to mark end of rows (work in continuous rounds with no joining)
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - (2 sc inc) x6 (24)
R5-R6 - sc around (24)
R7 - sc2tog x4 + 16 sc (20)
R8 - sc2tog x4 + 12 sc (16)
R9-R16 - sc around (16)
R17 - (3 sc inc) x4 (20) 
[Change to red yarn at end of R17]
R18-R20 - sc around (20)
R21 - (4 sc inc) x4 (24)
R22 - sc around (24) Finish off and stuff leg.

Body
Join legs on middle 2 stitches as shown in this tutorial. The instructions are in German but the video alone is enough to understand the technique. Once the legs are joined continue crocheting around both legs to form the body.
R23 - sc around (49)
R24 - sc around (49)
R25 - (5 sc inc) x 7 + 7 sc (56)
R26 - sc around (56)
R27 - (9 sc inc) x 5 + 6 sc (61)
R28 - sc 24 + (sc inc + 2 sc) x6 + 23 sc (67)
R29 - sc around (67)
R30 - sc around (67)
R31 - sc around (67)
R32 - sc around (67)
R33 - (8 sc dec) x6 + 5 sc dec (60)
R34 - sc around (60)
R35 - sc around (60)
R36 - sc around (60)
R37 - (8 sc dec) x6 (54) 
R38 - 14 sc dec dec + 23 sc dec dec + 10 sc (50)
R39 - sc around (50)
R40 - 14 sc dec + 23 sc dec + 9 sc (48)
R41 - sc around (48)
R42 - 15 sc dec + 21 sc dec + 8 sc (46)
R43 - sc around (46)
R44 - 14 sc dec + 20 sc dec + 8 sc (44)
R45 - sc around (44)
R46 - 13 sc dec + 19 sc dec + 8 sc (42)
R47 - sc around (42)
R48 - 12 sc dec + 18 sc dec + 8 sc (40)
R49 - sc around (40)
R50 - 13 sc dec + 17 sc dec + 6 sc (38)
R51 - sc around (38)
R52 - 12 sc dec + 17 sc dec + 5 sc (36)
R53 - sc around (36)
R54 - sc around (36)
R55 - (4 sc dec) x6 (30)
R56 - sc around (30)
R57 - sc around (30)
R58 - sc around (30)
R59 - (3 sc dec) x6 (24)
R60 - sc around (24)
R61 - (2 sc dec) x6 (18)
R62 - sc around (18)
Finish off and cut yarn leaving a long tail to attach the head. Stuff body firmly.

Arms (x2)
Start with black yarn
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - sc around (18)
R5 - (4 sc dec) x3 (15)
R6 - sc around (15)
R7 - (3 sc dec) x 3 (12)
R8 - sc around (12)
R9 - (4 sc dec) x 2 (10)
R10-R26 - sc around (10) [Change to red yarn at end of R26]
R27-37 - sc around (10)
Finish off and cut yarn leaving a long tail for joining. Stuff only hands and part way up arm. Optional: Add thumbs by winding black yarn around stitches on hand where thumbs would normally go (R5 facing forward or toward body). 

Head
Use white yarn.
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - (2 sc inc) x6 (24)
R5 - (3 sc inc) x6 (30)
R6 - (4 sc inc) x6 (36)
R7 - (5 sc inc) x6 (42)
R8 - (6 sc inc) x6 (48)
R9 - (7 sc inc) x6 (54)
R10 - (8 sc inc) x6 (60)
R11 - sc around (60)
R12 - sc around (60)
R13 - sc around (60)
R14 - sc around (60)
R15 - sc around (60)
R16 - sc around (60)
R17 - sc around (60)
R18 - sc around (60)
R19 - sc around (60)
R20 - sc around (60)
R21 - (8 sc dec) x6 (54)
R22 - sc around (54)
R23 - (7 sc dec) x6 (48)
R24 - (6 sc dec) x6 (42)
R25 - (5 sc dec) x6 (36)
R26 - (4 sc dec) x6 (30)
R27 - (3 sc dec) x6 (24)
R28 - (2 sc dec) x6 (18)
R29 - (2 sc dec) x3 + 6 sc (15)
R30 - sc around (15)
R31 - sc around (15)
Finish off and cut yarn leaving a long tail for joining. Stuff head and neck firmly to hold shape.

Hood
Use red yarn and follow pattern for Head up to Row 24. Check to make sure hood fits head adjusting tension based on fit. You may have to move up a hook size if the hood is too tight.
R1 - 6 sc (6)
R2 - inc x6 (12)
R3 - (sc inc) x6 (18)
R4 - (2 sc inc) x6 (24)
R5 - (3 sc inc) x6 (30)
R6 - (4 sc inc) x6 (36)
R7 - (5 sc inc) x6 (42)
R8 - (6 sc inc) x6 (48)
R9 - (7 sc inc) x6 (54)
R10 - (8 sc inc) x6 (60)
R11 - sc around (60)
R12 - sc around (60)
R13 - sc around (60)
R14 - sc around (60)
R15 - sc around (60)
R16 - sc around (60)
R17 - sc around (60)
R18 - sc around (60)
R19 - sc around (60)
R20 - sc around (60)
R21 - (8 sc dec) x6 (54)
R22 - sc around (54)
R23 - (7 sc dec) x6 (48)
R24 - (6 sc dec) x6 (42)
R25 - ss loosely around (42)
Finish off and cut yarn leaving a long tail for joining. Position on head as shown in photos above. After attaching head to body, I like to wrap the tail from the hood around the neck to cover joining stitches.

Ears (x2)
Start with black yarn.
R1 - 6 sc (6)
R2 - (sc inc) x3 (9)
R3 - sc around (9)
R4 - (2 sc inc) x3 (12) [Switch to red yarn at end of row.]
R5 - sc around (12)
R6 - (3 sc inc) x3 (15)
R7 - sc around (15)
R8  - (4 sc inc) x3 (18)
R9 - sc around (18)
R10 - sc around (18)
Finish off leaving 8" tail for joining.

Fold ear in half to form a natural curve before adding ear 'fluff'. With long strand (~18") white yarn (DK weight) embroider ear 'fluff' on one side (inside) of fox ear. Strands should point away from head, so work in opposite direction for each ear. Start and finish working strand from inside the folded ear so it can be knotted securely with the knot hidden from view. Refer to photo below for desired look.
Tail 
Start with white yarn.
R1 - 6 sc (6)
R2 - (sc inc) x3 (9)
R3 - sc around (9)
R4 - (2 sc inc) x3 (12)
R5 - sc around (12) [Switch to black yarn at end of row.]
R6 - (3 sc inc) x3 (15)
R7 - sc around (15) [Switch to red yarn at end of row.]
R8  - (4 sc inc) x3 (18) 
R9 - sc around (18)
R10 - (5 sc inc) x3 (21)
R11-19 - sc around (21)
R20 - dec + sc around (20)
R21 - dec + sc around (19)
R22 - dec + sc around (18)
R23 - dec + sc around (17)
R24 - dec + sc around (16)
R25 - dec + sc around (15)
R26-28 - sc around (15)
Finish off leaving 10" tail for joining. 
Stuff tail lightly before weaving yarn in opening stitches to pull tighter.

Attach to backside with colour changes and decreases facing down.
* * * * * * *
Refer to photos of Reddy Fox above before joining ears, head, arms and tail. I like to pin pieces in place before attaching. A few more photos of Reddy Fox are included in previous posts here and here.

Have fun and share photos if you make one too. I'd love to see them.


Be the first to comment - click on No comments: below

10 comments:

  1. Wow!! you are so talented!! thank you so much for posting this patterns... i would love you to see how many of them i have made, specially for Christmas i gave away like 6 of them... really appreciate it! Thanks again... Amanda

    ReplyDelete
    Replies
    1. Thank you Amanda. I would love to see what you have made. You could share your photos with me on Google+. I'll be off-line for a month while in Cuba though so may not see them until I get back.

      Delete
  2. Que maravilha!
    Adorei!
    Obrigada por partilhares a receita.
    Beijinhos
    Helena

    ReplyDelete
    Replies
    1. Thank you Helena,
      I'm happy you liked it.
      Beth

      Delete
  3. Oh no!!
    I'm half way through teddy Fox :( x

    Chanba@live.co.uk

    ReplyDelete
    Replies
    1. Out of respect for Lydia and her business I can no longer share this pattern. I left instructions for the ears as they are definitely my creation. Perhaps you could use one of my other patterns to finish and make your own version of a fox. I am sorry to leave you hanging and good luck.

      Delete
  4. Need a tail :O.... nice pattern though ;)

    ReplyDelete
    Replies
    1. I had to remove my pattern for the tail because Lalylala complained it was too similar to her Fibi Fox. I left the ear pattern because it is quite a bit different. I hope you can design your own tail. Good luck.

      Delete
  5. I'm so happy you decided to share "your" patterns again! I'm reddy to try and make one! I love all of them.

    ReplyDelete